TotalBoat Wood Honey Food Safe Wood Finish

Protective finishing oil enhances wood grain on interior wood surfaces

Non-toxic, food-safe, and water-resistant

Easy wipe-on application with low odor and no VOCs

TotalBoat Wood Honey Food Safe Wood Finish is a finishing oil designed for woodworkers, woodturners, and makers. It imparts a natural-looking, low-sheen finish while enhancing wood grain. Ideal for furniture, cutting boards, table tops, bowls, and more, this blend of oil and wax builds a deeper, richer appearance with multiple coats.

Product Overview

• Protective finishing oil beautifies and enhances wood grain on interior wood surfaces
• Non-toxic, food-safe, and water-resistant
• Easy to apply and maintain
• Works well as a friction polish, on or off the lathe
• No VOCs, no solvents, low odor, ideal for indoor use

Cleaner / Surface Preparation

• TotalBoat Teak Cleaner
• Wood bleach
• Denatured alcohol

Cleanup

• Absorb spillage with a rag
• Clean with detergent soap and water
• Dispose of rags properly (see warning below)

Application Tools / Materials

• Clean cotton rags
• Ultra-fine Scotch-Brite pads (gray only)
• Separate rags for applying and wiping off excess

Product Uses

• Protective wood finish
• Food-safe wood finish
• Friction polish for wood

Substrates

Wood only — designed for use directly on wood substrates

Surface Preparation

• Surface must be clean and dry
• Remove stains or grease before sanding
• Sand with 180–320 grit sandpaper in direction of grain
• Remove all sanding residue
• Wipe with rag dampened with denatured alcohol
• Allow wood to dry completely before application

Application

• Shake thoroughly for 2–3 minutes before use
• Pour a small amount onto surface
• Apply with clean rag or ultra-fine Scotch-Brite pad
• Work into wood using circular motion
• Apply evenly without spreading too thin
• Allow to sit for 10–20 minutes
• Wipe off excess with clean, dry rag
• Wait 20 minutes and repeat application
• Product will appear tack-free after 3–4 days
• Allow 5–7 days minimum before use at 50°F or warmer

Application Hint

• Application may raise wood grain
• If grain raises, wait 3–5 days for oil to polymerize
• Lightly sand with 320–400 grit in direction of grain
• Remove residue with lint-free cloth or compressed air
• Do not use solvents or damp materials to clean surface
• Apply additional coat and allow 5–7 days before use

Maintenance

• Clean with mild cleaners only
• Avoid heavy-duty cleaners or aggressive scrubbing
• Apply maintenance coats as needed
• Frequency depends on use and desired appearance
• No sanding required before recoating
• Optional light sanding for smoother finish

Warning

RAGS, SCOTCH-BRITE PADS, OR WASTE MATERIALS SOAKED WITH THIS PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF DISCARDED IMPROPERLY. IMMEDIATELY AFTER USE, PLACE IN A SEALED, WATER-FILLED METAL CONTAINER.

Application Data

Physical Data

Frequently Asked Questions