TotalBoat Signature Wood Stain

Deep penetrating oil-based stain for rich, consistent color

Fast drying with 30-minute recoat window for oil-based finishes

Available in 10 classic colors

TotalBoat Signature Wood Stain delivers consistent color and a lustrous finish across a range of classic tones—from Natural to Spanish Oak. This penetrating oil-based wood stain enhances the natural beauty of wood grain and is ideal for furniture, cabinetry, trim, paneling, and interior woodworking projects.

Product Overview

• Available Colors: American Walnut, Dark Mahogany, Dark Walnut, Early American, Espresso, Natural, Pickling White, Provincial, Spanish Oak, Weathered Wood
• Cleanup:
  • TotalBoat Brushing Thinner 100
  • TotalBoat Spray Thinner 101
  • Mineral Spirits
• Coverage: Up to 125 sq ft per quart (varies by wood porosity)
• Number of Coats: Typically 1 (additional coats optional)
• Application Methods: Brush, Rag, Spray
• Thinner/Reducer: Do not thin
• Compatible Substrates: All wood species
• Compatible Topcoats: Varnishes, polyurethanes, solvent- or water-based clear coats, epoxy coatings, lacquers

Surface Preparation

• Ensure surface is clean and free of dirt, dust, grease, oil, water, and wax.
• Remove all previous coatings.
• Sand with 220–320 grit in direction of grain.
• Remove all sanding residue.
• Wipe clean with dry rag or rag lightly dampened with denatured alcohol.
• Allow alcohol to evaporate for 10–15 minutes before applying.

Important Notes:

• Not recommended for non-porous substrates (composites, epoxy, metals, plastics).
• Always test before application.

Application Conditions

• Ideal: 70–80°F and less than 50% humidity
• Can be applied as low as 50°F (longer dry time)
• Above 80°F may cause uneven staining

Application

• Shake or stir thoroughly before use.
• Do not thin.
• Apply a thin, even coat in direction of grain.
• Wipe off excess stain within 1–2 minutes using clean rag.
• Do not allow excess to become tacky.
• One coat typically sufficient; second coat optional after drying.
• Custom colors can be created by blending stain colors.
• Natural color can be used to reduce intensity of other colors.

Application Methods

• Brush, rag, or spray
• Use natural or China bristle brush when brushing

Topcoating

• Must be topcoated (not a standalone finish)
• Do not sand before applying topcoat
• Apply topcoat directly once stain is dry
• Dry time before topcoat:
  • 30–45 minutes for solvent-based coatings
  • 24 hours for water-based or epoxy coatings
• Do not mix stain into varnish, finishes, or epoxy

Storage

• Store tightly sealed in cool, dry, well-ventilated area
• Keep away from heat, sparks, and ignition sources
• Keep out of reach of children

Shelf Life

• Minimum 1 year under proper storage conditions

Warning

RAGS, STEEL WOOL, OR WASTE MATERIALS SOAKED WITH THIS PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF DISCARDED IMPROPERLY.

Personal Safety

Use proper PPE and refer to the Safety Data Sheet for each color variant.

Product Data