TotalBoat Dewaxer & Surface Prep
Removes wax, grease, oil, and contaminants from surfaces
Optimized evaporation rate for effective cleaning
Ideal surface preparation prior to painting or varnishing
TotalBoat Dewaxer & Surface Prep is a surface preparation solvent designed to remove mold-release wax, dirt, grease, and oil from fiberglass, gelcoat, wood, bronze, aluminum, and stainless steel prior to priming and painting. It also functions as a cleaner for tools and equipment when used with solvent-based coatings.
Product Overview
- Optimized evaporation rate
- Cleans and dewaxes compatible substrates
- Ideal surface cleanse before paint or varnish
- Designed for marine coatings
Product Applications
- Surface preparation solvent wipe
- Surface dewaxing
- Tool and equipment cleanup
Compatible Substrates
- Fiberglass
- Gelcoat
- Wood
- Bronze
- Aluminum
- Stainless steel
Surface Preparation Solvent Wipe
- Use only on compatible or fully cured substrates
- Use clean, lint-free cotton rags
- Dampen rag with product and wipe area thoroughly
- Work in small sections (1’x1’ or 2’x2’ areas)
- Before solvent evaporates, wipe with clean, dry rag
- Change rags frequently
- Repeat as needed until contaminants are removed
Tool and Equipment Cleanup
- Effective cleaner for tools and equipment used with solvent-based coatings
- Removes paint before it dries
Personal Safety
Use proper personal protective equipment and refer to the Safety Data Sheet for additional information.
Warning
RAGS, STEEL WOOL, OR WASTE SOAKED WITH THIS PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF DISCARDED IMPROPERLY. IMMEDIATELY AFTER USE, PLACE RAGS, STEEL WOOL, OR WASTE IN A SEALED, WATER-FILLED METAL CONTAINER.
Application Data
| Application Method | Surface wipe, cleanup |
| Application Temperature | 40–100°F |
| Coverage | N/A |
Physical Data
| Solvent Type | Surface preparation solvent / dewaxer |
| Density | 6.39 lbs/gallon |
| Flash Point | 53.6°F |
| Units | Quart, Gallon |
| VOC | <870 g/L |
| Storage | Cool, dry area away from heat or flame |
Frequently Asked Questions
What does Dewaxer & Surface Prep remove?
It removes mold-release wax, grease, oil, dirt, and other contaminants from surfaces prior to coating.
When should this product be used?
It should be used prior to priming or painting to ensure a clean, contaminant-free surface.
Can it be used for tool cleanup?
Yes, it can be used to clean tools and equipment used with solvent-based coatings before the coating dries.