TotalBoat White Knight Stain Remover
Removes stains from fiberglass, gelcoat, and painted surfaces
Easy application with brush or rag
Washes away clean with water
TotalBoat White Knight Stain Remover is designed to remove stains from fiberglass, gelcoat, and painted surfaces. It applies easily and works quickly to break down stains, then rinses away clean with water.
Substrates
- Fiberglass
- Gelcoat
- Painted surfaces
Support Products
Application
- Test on a small, inconspicuous area before full application
- Wear rubber gloves during application
- Wet the surface before applying product
- Apply a thin layer using a rag, terrycloth towel, or brush
- Allow product to work for 10–15 minutes
- Scrub using a soft brush or sponge
- Thoroughly rinse with water before product dries
- Do not allow product to dry on the surface
- Some stains may require a second application
- After cleaning, protect surface using polish or wax
Application Notes
- Product is light blue and will wash away when fully removed
- If allowed to dry, removal becomes more difficult
- Always wipe away thoroughly before drying occurs
- Use proper safety equipment during application and removal
Cleanup
- Water
Application Data
| Application Method | Rag, terrycloth towel, brush |
| Number of Applications | 1 (second may be required for tough stains) |
| Application Temperature | 40–100°F |
| Humidity | 0–90% |
| Cleanup | Water |
| Coverage | N/A |
Physical Data
| Color | Light blue (washes away when removed) |
| Components | One |
| Finish | N/A |
| Units | 15 oz |
| Flash Point | N/A |
| VOC | N/A |
| Storage | Cool, dry area |
Frequently Asked Questions
How long should White Knight sit on the surface?
Allow it to work for 10–15 minutes, then scrub and rinse thoroughly before it dries.
Can White Knight dry on the surface?
No, it should be rinsed off before drying. If it dries, removal becomes more difficult.
Is a second application ever needed?
Yes, tough stains may require a second application.