TotalBoat Epoxy Primer Thinner 200
Reduces viscosity of epoxy barrier coats and primers
Improves flow for brush, roller, and spray application
Also used for cleanup and inflatable boat surface preparation
TotalBoat Epoxy Primer Thinner 200 is a solvent formulated to extend and improve the flow of epoxy-based coatings. It is ideal for thinning compatible TotalBoat barrier coats and primers for brush, roller, or spray application. It can also be used for equipment cleanup and as a solvent wipe prior to applying inflatable boat coatings.
Product Overview
- Improves flow and leveling of epoxy coatings
- Designed for brush, roller, and spray applications
- Compatible with specified TotalBoat epoxy systems
- Can be used for cleanup and surface preparation
Compatible TotalBoat Products
Special Use: Inflatable Boat Surface Preparation
- Used as a solvent wipe prior to applying TotalBoat Inflatable Boat Paint
- Dampen a clean, lint-free cotton rag with thinner
- Wipe surface thoroughly
- Immediately follow with a clean, dry rag
- Apply coating as directed
Application
Thinning Epoxy Coatings
- Mix only with compatible epoxy products
- Follow product-specific induction period before adding thinner
- Induction time varies by product
- Add thinner slowly and carefully before application
- Mix thoroughly until desired viscosity is reached
- Typical maximum reduction: 10%
- Do not exceed 10% unless product instructions specify otherwise
Important Application Notes
- This thinner is not for use with all TotalBoat products
- Use only with products specified in this document
Tool and Equipment Cleanup
- Effective cleaner for tools and equipment used with compatible epoxy coatings
Warning
RAGS, STEEL WOOL, OR WASTE SOAKED WITH THIS PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF DISCARDED IMPROPERLY. IMMEDIATELY AFTER USE, PLACE RAGS, STEEL WOOL, OR WASTE IN A SEALED, WATER-FILLED METAL CONTAINER.
Application Data
| Application Method | Brush, Roll, Spray, Cleanup |
| Mix Percentage | Up to 10% (unless otherwise specified) |
| Coverage | N/A |
| Application Temperature | N/A |
| Pot Life | N/A |
Physical Data
| Components | One |
| Type | Thinner for brushing, rolling, spraying, and cleanup |
| Flash Point | 45°F |
| Units | Quart |
| VOC | 840 g/L |
| Storage | Cool, dry area away from heat or flame |
Frequently Asked Questions
How much Epoxy Primer Thinner 200 should be added?
For most applications, up to 10% by volume. Always follow the specific coating instructions.
When should the thinner be added to epoxy coatings?
After the epoxy has completed its required induction period, which varies by product.
Can this be used as a surface prep solvent?
Yes, it is designed as a solvent wipe for inflatable boat surfaces prior to applying coating.