TotalBoat FlexEpox is the preferred TotalBoat epoxy system to bond or seal white oak.
It is very important to sand the surfaces that are to be bonded or sealed with 80-grit sandpaper (or coarser), and all sanding residue must be removed prior to applying TotalBoat FlexEpox. Another trick to promoting the best bond to white oak is to solvent wipe with acetone after sanding, prior to applying the epoxy. ONLY use a clean, cotton rag (do not use any synthetic rag materials). Allowing the acetone to evaporate completely directly prior to applying FlexEpox can also promote the strongest bond.
Article is closed for comments.