TotalBoat TableTop Epoxy can be applied directly over TotalBoat ThickSet Epoxy.
For instances where the ThickSet is newly poured and is firm but not fully cured to a hard material, TableTop Epoxy can be applied directly over it without any surface preparation.
For instances where the ThickSet has already cured to a hard material, the surface must be completely clean and have no possible surface contaminants. If there are any surface blemishes, they can be lightly sanded out with 220-grit sandpaper. Sanding the entire surface before applying TableTop Epoxy is not required, but will promote the best bond for the new layer of TableTop Epoxy.
Please sign in to leave a comment.