TotalBoat TotalGold will not form a great bond to powder coated surfaces, even if the substrate has been sanded first. To promote the best adhesion, sand the surface with 180-grit sandpaper or coarser, and apply an epoxy-based primer, such as TotalBoat 2-Part Epoxy Primer, or TotalBoat TotalProtect first. Allow the epoxy-based primer to cure for 5-7 days and sand with 220-grit sandpaper, and remove any sanding residue prior to applying TotalBoat TotalGold paint.
Comments
0 comments
Article is closed for comments.